Elektro-Automatik ELR_10080_170_3U Electronic load 0...80V_0...170A_5000W

Kostenlose Lieferung

ELR-10000 3U Series features:

Wide range input, 208 V - 480 V +-10 % 3ph AC
Active Power-Factor-Correction, typical 0.99
Regenerative with energy recovery into the grid
Very high efficiency up to 96 %
High performance of up to 15 kW per unit
Voltage from 0 - 80 V up to 0 - 2000 V
Currents from 0 - 20 A up to 0 - 510 A
Flexible power regulated DC output stages (autoranging)
Regulation mode CV, CC, CP, CR with fast crossover
Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
Color 5“ TFT display with touch control and intuitive user interface
Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series
Master-Slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
Integrated function generator with predefined curves
Integrated battery test mode
Photovoltaic test mode, MPPT
Command languages and drivers: SCPI and ModBus, LabVIEW, IVI
Built-in interfaces: USB, Ethernet, Analog, USB Host, Master-Slave-Bus, Share-Bus

Detaillierte Informationen

Weitere Produkte in der Kategorie

(exkl. MwSt.)	€ 9 797,00
Preis inkl. MwSt.	€ 11 756,40
Stk.
Verfügbarkeit des Produkts	Auf Anfrage
Produktnummer	EA_ELR_10080_170_3U

Zusammenhängende Produkte
Zubehör

Garantie 24 Monate

Produktseite des Hersteller

Detailbeschreibung
Videos und Dateien zum Herunterladen

Detailbeschreibung Elektro-Automatik ELR_10080_170_3U Electronic load 0...80V_0...170A_5000W

The device series from EA Elektro-Automatik ELR 10000 are programmable electronic loads. The device is regenerative and feeds the energy back into the local grid with an efficiency up to over 96%. The ELR 10000 series includes single and three phase units, which, together with the wide input range, allows use with practically all global mains voltages. The DC voltage and current are directed by the application and the spectrum ranges from 0 - 80 V to 0 - 2000 V and from 0 - 6 A up to 0 - 1000 A in a single device. The DC-Input operates as a flexible input stage with a constant power characteristic (autoranging), and a wide voltage, current and power range. To achieve higher power and current all units are equipped with a master-slave bus. This enables up to 64 parallel connected devices to be combined into one system which can provide a load up to 1920 W and 64000 A. Such a system works as a single unit and can use different power classes, only the voltage class must remain constant. In this way a user can construct a 75 kW system from two 30 kW and one 15 kW devices from the ELR 10000 range. Furthermore, typical laboratory functionality is provided. This includes an extensive function generator, alarm and warning management, assorted interfaces and ports, software solutions and many more functions.

Nach oben

Zeigen videos und dateien zum herunterladen »