Aim-TTI TSX3510 Bench/System DC Power Supply, Single Output, Mixed-mode Regulation 35V/10A with Analog Controls, No Remote Interfaces
TSX Series
- Compact & lightweight power supply
- 0 to 18V at 0 to 20A or 0 to 35V at 0 to 10A
- Bench or rack mounting, front & rear terminals
- Very low noise, excellent transient response
- Comprehensive protection including OVP trip
- High setting resolution, remote sense terminals
- Analogue controls
- RS-232 and GPIB interfaces as standard
- Keyboard setting of all parameters
- Rotary and delta (step) control of V and I
- Watts display, non-volatile storage of 25 settings
- Fully programmable with bus readback of V & I Detaillierte Informationen
P versions add:>
(exkl. MwSt.) | € 779,10 |
Preis inkl. MwSt. | € 934,92 |
Verfügbarkeit des Produkts | Auf Anfrage |
Produktnummer | AIM-TTI_TSX3510 |
Garantie 36 Monate
Detailbeschreibung Aim-TTI TSX3510 Bench/System DC Power Supply, Single Output, Mixed-mode Regulation 35V/10A with Analog Controls, No Remote Interfaces
The TSX series represents the state of the art in high output PSU design. A wide range of voltage-current output combinations will become available with power levels of 360 Watts and more. Each output combination is available in two versions: with conventional analogue controls (TSX) and with programmable controls (TSX-P).
The heart of all TSX series PSUs is an innovative regulator design which combines switch mode pre-regulation with linear post-regulation. The pre-regulator uses specially developed techniques to dramatically reduce the capacitance between input and output thus eliminating the high levels of common-mode noise normally associated with switch mode PSUs. The linear post-regulator combines very low levels of output noise with excellent load regulation and transient response. The result is performance comparable with a pure linear design.
The attractively styled casing takes up very little bench space and incorporates a tilt bail to angle the front panel when required.
All TSX series PSUs can operate in both constant voltage and constant current modes with automatic crossover and automatic mode indication.
All versions incorporate high resolution digital meters for both voltage and current. V and I levels can be set to high accuracy prior to connection to the load and the limit settings can be checked at any time. A damping switch for the current meter enables the average value of rapidly changing currents to be read.
All versions incorporate a fully variable OVP trip to protect against regulator failure. The output is fully protected and other protection functions include regulator over temperature, and sense miswiring.
Videos und Dateien zum Herunterladen Aim-TTI TSX3510 Bench/System DC Power Supply, Single Output, Mixed-mode Regulation 35V/10A with Analog Controls, No Remote Interfaces
Das Produkt ist in den folgenden Kategorien eingestuft
Das könnte Sie auch interessieren
Zusätzlicher Inhalt
Unser Angebot
Kontakt
x.test GmbH Amalienstraße 48 1130 Wien |
|
+43 1 8778171-0 +43 1 8778171-799 |
|