<

Einführung DC Netzteile Aim-TTi DC Netzteile manuelle Bedienung Aim-TTI EX2020R Bench DC Power Supply, Mixed-mode Regulation, Analog Controls 20V/20A Single

Aim-TTI EX2020R Bench DC Power Supply, Mixed-mode Regulation, Analog Controls 20V/20A Single

Kostenlose Lieferung

Aim-TTI EX2020R Bench DC Power Supply, Mixed-mode Regulation, Analog Controls 20V/20A Single

EX Series

     
  • Single outputs, 35V/5A, 18V/10A, 42V/10A, 20V/20A
  •  
  • Dual or triple outputs, 35V/4A
  •  
  • Independent digital voltage and current meters for each output with 4 digit resolution
  •  
  • Switchable local or remote sensing
  •  
  • Constant voltage or constant current operation
  •  
  • Variable 1.5 - 5.0V auxiliary output at 5A (EX354RT)
  •  
  • Compact design uses less bench space
  •  
  • Silent fan-free cooling (not EX202R/EX4210R)
  •  
  • DC output switches, automatic mode indication
  • RS232 or USB controlled models available (35V/5A single)
  • Multi-mode dual model 2x(75V/2A) or 75V/4A or 150V/2A
  • Detaillierte Informationen

(exkl. MwSt.) € 670,32
Preis inkl. MwSt. € 804,38
 Stk.
Verfügbarkeit des Produkts Auf Anfrage
Produktnummer AIM-TTI_EX2020R

Garantie 36 Monate

Detailbeschreibung Aim-TTI EX2020R Bench DC Power Supply, Mixed-mode Regulation, Analog Controls 20V/20A Single

    The new EX-R series has been extended by incorporating models from the best selling EX series. By adding four digit meters and switchable remote sensing, the EX-R series offers much higher precision whilst retaining the simplicity of operation which many bench-top power supply users prefer. Six models are offered including single, dual and triple outputs and covering a power range of 175 watts up to 420 watts.

     

    The EX-R series combines high frequency switch-mode pre-regulation with linear post-regulation to provide performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good

     

    The EX-R series incorporates separate voltage and current meters on each main output with a resolution of 10mV and 1mA (10mA on higher current models). The fixed resolution avoids the misinterpretation of readings that can occur with auto-ranging 3 or 3½ digit meters where the decimal point position moves as the reading changes.

    Each main output incorporates remote sense terminals that can be enabled or disabled at the flick of a switch. Remote sensing is essential for maintaining precise regulation at the load and true metering of the load voltage. Many other power supplies omit remote sense, and quote regulation figures that could never be achieved in a practice.

    Each main output has a DC on-off switch. This enables voltage and current settings to be viewed before the load is connected and allows multiple outputs to be controlled individually. Surprisingly, many power supplies omit this essential feature.

    Each main output can operate in constant voltage or constant current mode with automatic crossover and mode indication. Coarse and fine voltage controls are provided. The current control is logarithmic enabling low current levels to be set accurately.

    EX-R series power supplies use classic analog controls for voltage and current. The large and bright displays have a fixed resolution to avoid confusion. Preset voltage and current levels are shown when the DC output switch is turned off. Remote sense is available when needed but is disabled by setting the switch to Local.

Nach oben

Zeigen videos und dateien zum herunterladen  »

Videos und Dateien zum Herunterladen Aim-TTI EX2020R Bench DC Power Supply, Mixed-mode Regulation, Analog Controls 20V/20A Single

Nach oben

Zeigen detailbeschreibung  »

Das Produkt ist in den folgenden Kategorien eingestuft

Das könnte Sie auch interessieren

© 2024, x.Test GmbH

Impressum | Nutzungsbedingungen | Sitmap

Überspringen an Beginn der Seite